You can reactivate your dead antenna here’s what you need:

Software are all free:

- Softperfect Research Network Scanner http://www.softperfect.com/products/networkscanner/

- Technitium MAC Address Changer v5 http://www.technitium.com/tmac/index.html

- all tools you need http://www.nirsoft.net/packages/networktools.zip

here’s what you’ll do.
When you try to browse the internet you’ll be redirected to the SmartBro Portal right? If not you can open the antenna using the default
========== step 1 ==============
http://169.254.1.1/lockconfig.html. or http://169.254.1.1 remove the password
========== step 2 ==============
other way around http://169.254.1.1 default of canopy users admin password admin / user root no password just click enter you are in now...
========== step 3 ==============
1. run the NETSCAN .
2. go to Options Menu then click on Program Options of NETSCAN.. shortcut ctrl-o.
3. Click Additional tab then check the Resolve MAC Addresses. click OK.
4. on the IP Range enter 192.168.100.1 TO 192.168.224.254 then click Start Scanning
5. it will display all the live IP addresses.
6. run the MAC Address Changer.
7. Select any live IP Address that was detected by NETSCAN.
8. use the MAC Address Changer to change your MAC address using the one you selected in NETSCAN.
9. change your ip address using the corresponding IP address of the MAC address you selected in NETSCAN.(note dont worry you can bring back the original mac address )
10. now disable your network adapter then enable it back.
11. Try to browse the internet.you got "FREE" activated internet now by smartbro
by the way … using NETSCAN you can view some shared folders and printers on some other smartbro subscribers…

Share the blessing - Moki!